Configuring The Spa9000; Configuring General Settings For Spa9000 - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Configuring Phone Service and Voice Mail

Configuring the SPA9000

Configuring the SPA9000
STEP 1
STEP 2
STEP 3
SPA9000 Voice System Installation and Configuration Guide for Web UI
On the SPA9000, you configure a "line" for ITSP phone service and another "line"
for SPA400 services such as PSTN access and voice mail.
•
"Configuring General Settings for SPA9000," on page 66
•
"Configuring Internet Phone Service (ITSP) on the SPA9000," on page 68
•
"Configuring SPA9000 Connectivity with the SPA400 for PSTN and Voice Mail
Service," on page 70
•
"Configuring SPA9000 Connectivity for PSTN Access Only," on page 74

Configuring General Settings for SPA9000

There are several settings that are recommended to ensure good performance on
your voice network. Complete this procedure before performing any other
configuration tasks.
Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
Click Voice tab > SIP.
Enter the following settings:
•
PBX Parameters
Under
the voice path goes through the SPA9000, which acts as a media relay.
SPA9000 Voice tab> SIP page: PBX Parameters section
Force Media Proxy
, set to Yes. This setting ensures that
5
66