Configuring Third-Party Isdn Gateways (Optional); Outbound Call Routing - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Configuring Phone Service and Voice Mail

Configuring Third-Party ISDN Gateways (Optional)

Configuring Third-Party ISDN Gateways (Optional)

Outbound Call Routing

SPA9000 Voice System Installation and Configuration Guide for Web UI
Optionally, you can connect an ISDN gateway to your SPA9000 Voice System to
provide access to ISDN phone services, typically via one or multiple Basic Rate
Interface (BRI) access.
Each ISDN gateway occupies one SIP Line, similar to the SPA400.
The SPA9000 supports the following third party ISDN gateways:
•
Mediatrix® 4401 BRI Digital Gateway – 1 BRI
•
Mediatrix® 4402 BRI Digital Gateway – 2 BRI
•
Mediatrix® 4404 BRI Digital Gateway – 4 BRI
To configure SPA9000 and Mediatrix® 4400 Series ISDN gateways, download
and follow the instructions in the
Configuration Guide
. Partners can find this guide by going to Cisco Partner
Central, Voice & Conferencing page, Technical Resources section. Use the
following URL:
www.cisco.com/web/partners/sell/smb/products/
voice_and_conferencing.html#~vc_technical_resources
By default, all external calls are placed by pressing 9. You may want to set up
different steering digits so that users can choose the line for an outbound call. For
example, you may want users to press 8 for the ITSP service that is configured on
Line 1, and to press 9 for the PSTN service that is configured on Line 2.
This section includes procedures and examples.
•
"Configuring Steering Digits," on page 91
•
"Typical Outbound Call Routing Examples," on page 93
•
"Routing Calls to the Auto Attendant (Default)," on page 95
•
"Routing Calls to a Receptionist, Extension, or Hunt Group," on page 96
•
"Using Direct Inward Dialing to Phone Extensions," on page 98
SPA9000-Mediatrix® 4400 ISDN Gateways
5
90