Configuring Steering Digits - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Configuring Phone Service and Voice Mail
Outbound Call Routing
STEP 1
STEP 2
STEP 3
SPA9000 Voice System Installation and Configuration Guide for Web UI

Configuring Steering Digits

Follow this procedure to configure the steering digits.
Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
Click Voice tab > SIP.
To configure the call routing rules for outbound calls, complete the following tasks:
a. Scroll down to the
b. Edit the Call Routing Rule to include a code for the voice mail server, as
described below.
The default string is: (<:L1,2,3,4>9xx.)
NOTE
SYNTAX: (<:L1,backupline>digitsxx. | <:L2> digitsxx. | <:L3>
digitsxx. | <:L4> digitsxx.)
•
L 1, L2, L3, L4: The lines that are configured on the SPA9000 Voice tab >
Line pages (Line 1 ... Line 4).
•
Backupline: The line interface number of the PSTN/ISDN line that is used for
backup of the ITSP VoIP Service (i.e. 2, 3, 4). It is assumed and
recommended that ITSP connection is configured always on Line 1,
whereas Line 2, Line 3, and Line 4 can be used for connecting to the PSTN
(via SPA400) or ISDN (via a third party gateway).
•
Digits: The steering digits that are used to select the corresponding line; for
example 9.
EXAMPLE 1: In this example, a user would press 9 for Line 1 and 8 for Line 2:
<:L1>9xx. | <:L2>8xx.)
EXAMPLE 2: In this example, a user would press 9 for Line 1 (ITSP), 8 for Line 2
(PSTN) and will use Line 2 as backup of Line 1.
(<:L1,2>9xx. | <:L2>8xx.)
PBX Phone Parameters
c. Under
•
For United States:
(sdigits,[3469]11S0 | sdigits,<:1408>[2-9]xxxxxx |
PBX Parameters
section.
, enter the appropriate code in the
5
Dial Plan
field:
91