Installing The Spa400 - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Connecting the Equipment

Installing the SPA400

STEP 3
STEP 4
Installing the SPA400
SPA9000 Voice System Installation and Configuration Guide for Web UI
Click OK to close the confirmation message.
To verify the upgrade, complete the following tasks:
a. Press the Setup button on the phone keypad.
b. Scroll down to 10 - Product Info, and then press the Select soft key.
c. Scroll down to 3 - Software Version.
d. Verify that the new firmware version number appears.
The SPA400 is an integrated part of the SPA9000 Voice System. The SPA400
provides connectivity to the PSTN network and has an integrated voice mail
application available on the same platform. Depending on your voice service
configuration (i.e. combination of VoIP, PSTN and ISDN line/services), you can
connect up to four SPA400 devices to your SPA9000 Voice System.
This section includes the following topics:
•
"Connecting the SPA400 to the Switch," on page 59
•
"Configuring the SPA400 Network Connection," on page 61
•
"Upgrading the Firmware for the SPA400," on page 63
4
58