Configuring Internet Phone Service (Itsp) On The Spa9000 - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Configuring Phone Service and Voice Mail
Configuring the SPA9000
NOTE
STEP 1
STEP 2
STEP 3
SPA9000 Voice System Installation and Configuration Guide for Web UI

Configuring Internet Phone Service (ITSP) on the SPA9000

If you are using Internet phone service, you need to configure the SPA9000 with
the account information. In this procedure, you use the SPA9000 web
configuration utility to enter the logon information and the address of the proxy
server. After you complete these steps, you will verify that the phone service is
registered and that you can place and receive calls.
This procedure is required if you are using Internet phone service. If you are using
PSTN access only (via the SPA400), go to the next procedure,
SPA9000 Connectivity with the SPA400 for PSTN and Voice Mail Service," on
page 70.
Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
Click Voice tab > Line 1.
Any line can be used for ITSP service. However, for simplicity and
NOTE
consistency throughout this Install Guide, Line 1 is used for this purpose.
Enter the account information for your ITSP account:
•
User ID: The account number or logon name for your ITSP account (often the
same as the phone number)
•
Password: The password for your ITSP account
•
Proxy: The proxy server for your ITSP account
5
""Configuring
68