Setting Up Each Station - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Configuring Phone Service and Voice Mail

Setting Up Each Station

Setting Up Each Station
STEP 1
STEP 2
STEP 3
STEP 4
SPA9000 Voice System Installation and Configuration Guide for Web UI
To set up each station, you need to assign a name, configure general settings, and
enable voice mail access (if applicable).
Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
Click PBX Status, near the top right corner of the page.
The screen lists each phone by Station Name and Extension number.
Find the phone that you want to configure, and then click the hyperlink in the IP
Address column.
The Telephone Configuration page appears in a separate browser window.
To enter a station name for the phone (recommended), complete the following
tasks:
a. Click the Phone tab.
SPA9000 PBX Status page
5
85