Organization - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Cisco small business pro voice system version 6.1
Hide thumbs Also See for SPA921 - Cisco - IP Phone:
Table of Contents

Advertisement

Organization

SPA9000 Voice System Installation and Configuration Guide for Web UI
The information in this guide is organized into the following chapters and
appendices:
Chapter
Chapter 1, "Getting Started"
Chapter 2, "Installation and
Configuration Process
Overview"
Chapter 3, "Preparation"
Chapter 4, "Connecting the
Equipment"
Chapter 5, "Configuring
Phone Service and Voice
Mail"
Chapter 6, "Configuring
Special Features"
Chapter 7, "Localization"
Description
This chapter introduces you to the SPA9000
Voice System by describing the components
and presenting several deployment scenarios.
This chapter provides an overview of the
installation and configuration process.
This chapter is essential reading before you
begin installing the equipment or configuring the
system. To ensure that the installation process
goes smoothly, verify that you have the required
services, equipment, and information.
This chapter explains how to connect your
equipment and upgrade the firmware. At the end
of each section, you verify that the installation is
progressing correctly.
This chapter guides you through the basic tasks
that are required to get your voice system
running. After you complete these procedures,
users will be able to place and receive calls from
the ITSP and from the PSTN. Callers will be able
to leave voice mail, and users will be able to
retrieve it.
This chapter helps you to get started setting up
various features that may be useful to your
customer.
This chapter explains how to localize your
SPA9000 Voice System with the language files,
tones, and ring patterns for your region.
Preface
viii

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa9000Spa901Spa941Spa922Spa942Spa962 ... Show all

Table of Contents