Configuring The Spa400; Configuring The Spa400 Network Connection - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Configuring Phone Service and Voice Mail

Configuring the SPA400

Configuring the SPA400
STEP 1
STEP 2
SPA9000 Voice System Installation and Configuration Guide for Web UI
If you have a SPA400 in your network, you need to configure the SPA400 to
communicate with the SPA9000. In addition, if you are using the SPA400 as a voice
mail server, you need to configure the voice mail settings.
•
"Configuring the SPA400 Network Connection," on page 76
•
"Configuring the SPA400 to Communicate with the SPA9000," on page 78
•
"Configuring the Voice Mail Server and Voice Mail Users," on page 82

Configuring the SPA400 Network Connection

The SPA400 becomes a DHCP client of any server on the network. The
recommended setting is to use a static IP address. This configuration provides
ease of installation and prevents connectivity issues that would occur if the IP
address of the SPA400 changed.
Start Internet Explorer, and enter the IP address of the SPA400.
By default, the SPA400 is configured to obtain an IP Address via DHCP. You
NOTE
can check the obtained IP address on the router DHCP server's client list.
When the password prompt appears, enter the default user name, Admin, with no
password. Then click OK.
5
76