Finding The Driver Version - Cisco AIR-PCI340 Installation And Configuration Manual

Chapter 9 Routine Procedures
Figure 9-3
Select Uninstall All Components and click Next.
Step 4
When prompted to confirm your decision, click Yes. The process to uninstall the files begins. You ares
Step 5
notified throughout the process as each component is uninstalled.
When the process completes, you are notified that the system is about to reboot. Close any open
Step 6
applications and click OK.
If you did not remove the client adapter from your computer, the Found New Hardware Wizard screen
Step 7
appears after your computer reboots. Click Cancel.
Note
This procedure does not remove the Install Wizard file or its uncompressed files. If you want to remove
Step 8
them from your computer, find the files using Windows Explorer and delete them.

Finding the Driver Version

Follow the instructions in this section to find the version of the driver that is currently installed for your
client adapter.
Step 1 Open ACU.
Step 2 Click the Status icon or select Status from the Commands drop-down menu. The Status screen displays
the current version of your client adapter's driver in the NDIS Driver Version field.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Cisco Aironet Wireless LAN Client Adapter Installation Wizard screen
The Found New Hardware Wizard screen does not appear on computers running Windows NT.
Client Adapter Software Procedures
9-7