Upgrading The Client Adapter Software; Upgrading The Firmware; Finding The Firmware Version - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Chapter 8 Routine Procedures

Upgrading the Client Adapter Software

This section provides instructions for the following procedures:
•
•

Upgrading the Firmware

The client adapter is shipped with the firmware installed in its Flash memory; however, a more recent
version of the firmware may be available from Cisco.com. Cisco recommends using the most current
version of radio firmware. Follow the instructions in this section to find the version of your client
adapter's firmware and to upgrade it if a more recent version is available from Cisco.com.
Note Firmware version 5.40.10 is recommended for use with client adapter driver and utility version 2.50.

Finding the Firmware Version

Follow these steps to determine if you need to upgrade the client adapter's firmware.
To find the version of firmware that your client adapter is currently using, follow these steps:
Step 1
a.
b.
Figure 8-2
OL-1375-04
Upgrading the firmware, see below
Upgrading the driver and client utilities,
Double-tap the ACU icon or select Start > Programs > Cisco > ACU.
Tap the Firmware tab. The Firmware screen appears (see
Firmware Screen
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE

Upgrading the Client Adapter Software

page 8-6
Figure 8-2).
8-3