After A Reboot Or Logon - Cisco AIR-PCI340 Installation And Configuration Manual

Using LEAP with the Windows Username and Password

After a Reboot or Logon

After your computer reboots or you log on, follow the steps below to LEAP authenticate.
When the Windows login screen appears (see
Step 1
and password and click OK. The domain name is optional.
Note
Figure 6-2
Figure 6-3
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
6-4
If the authentication attempt fails, an error message appears after the LEAP timeout period has
expired. Refer to the "LEAP Authentication Error Messages" section on page 10-20
necessary action to take.
If your computer is running Windows NT, 2000, or XP and has Novell Client 32 software
installed, a separate LEAP login screen appears before the Novell login screen. If this occurs,
enter your Windows and Novell username and password in the login screens and click OK.
Windows Login Screen (Windows 98, 98 SE, and Me)
Windows Login Screen (Windows NT)
Chapter 6
Figure 6-2 and Figure 6-3), enter your Windows username
Using EAP Authentication
for the
OL-1394-07