Selecting Among Several Installed Client Adapters
Selecting Among Several Installed Client Adapters
If more than one client adapter is installed in your computer, follow the instructions below to specify the
one for which you want to set up profiles in ACU.
Double-click the Aironet Client Utility (ACU) icon on your desktop or double-click My Computer >
Step 1
Control Panel > Aironet Client Utility to open ACU. The Select A Wireless LAN Adapter Card screen
appears (see
Note
Figure 3-8
Step 2
Select the card you wish to configure from the list of available cards and click OK.
Step 3
Go to
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
3-24
Figure
3-8).
The Select A Wireless LAN Adapter Card screen appears when you start ACU if more than one
card is inserted in your computer or no cards are inserted but more than one card is installed.
Select A Wireless LAN Adapter Card Screen
Chapter 4
to create profiles for this card.
Chapter 3
Installing the Client Adapter
OL-1394-07