Tool Tip Window - Cisco AIR-PCI340 Installation And Configuration Manual

Chapter 8 Using the Aironet Client Monitor (ACM)

Tool Tip Window

When you hover the cursor over the ACM icon, the Tool Tip window appears (see
Figure 8-1
This window provides information on the current status of your client adapter.
describes each element of the Tool Tip window.
Table 8-2
Status Element
Active profile
SSID
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Tool Tip Window
Tool Tip Window Elements
Description
The network configuration (or profile) that your client adapter is
currently using.
Note
Note
The name of the network to which your client adapter is currently
associated.
Note
If auto profile selection is enabled, the profile name is preceded
by the word Auto.
If an application other than ACU was used to configure the
client adapter, Other Configuration Application appears.
Refer to the SSID1 parameter in
setting the client adapter's SSID.
Tool Tip Window
Figure 8-1).
Table 8-2 lists and
Table 5-2 for information on
8-3