Cisco AIR-PCI340 Installation And Configuration Manual page 159

Chapter 7 Performing Diagnostics
Table 7-4
Statistic
Packets Incorrect MIC
Packets No MIC Seed
Packets Wrong MIC Sequence
Up Time (hh:mm:ss)
Total Up Time (hh:mm:ss)
Transmit Statistics
Multicast Packets Transmitted
Broadcast Packets Transmitted
Unicast Packets Transmitted
Bytes Transmitted
Beacons Transmitted
RM Reports Transmitted
Ack Packets Transmitted
RTS Packets Transmitted
CTS Packets Transmitted
Single Collisions
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Client Adapter Statistics (continued)
Description
The number of packets that were discarded because an incorrect
MIC value was found.
Note
The number of packets that were discarded because no MIC seed
was received.
Note
The number of packets that were discarded because the MIC
sequence number was wrong.
Note
The amount of time (in hours:minutes:seconds) since the Reset
button was selected. If the client adapter has been running for
more than 24 hours, the time is displayed in days,
hours:minutes:seconds.
The amount of time (in hours:minutes:seconds) that the client
adapter has been receiving power. The total up time continues to
increment even if the Reset button is selected. If the adapter has
been running for more than 24 hours, the time is displayed in
days, hours:minutes:seconds.
The number of multicast packets that were transmitted
successfully.
The number of broadcast packets that were transmitted
successfully.
The number of unicast packets that were transmitted successfully.
The number of bytes of data that were transmitted successfully.
The number of beacon packets that were transmitted successfully
(in ad hoc mode only).
The number of radio management (RM) report frames that were
generated and transmitted in response to a valid RM request.
Note
The number of acknowledgment (Ack) packets that were
transmitted in response to successfully received unicast packets.
The number of request-to-send (RTS) packets that were
transmitted successfully.
The number of clear-to-send (CTS) packets that were transmitted
in response to a successfully received RTS packet.
The number of packets that had to be retransmitted once because
a collision occurred.
Viewing Statistics for Your Client Adapter
This field is displayed only if MIC is enabled on the
access point.
This field is displayed only if MIC is enabled on the
access point.
This field is displayed only if MIC is enabled on the
access point.
This field is displayed only if (RM) is enabled.
7-15