After A Reboot, Logon, Or Card Insertion - Cisco AIR-PCI340 Installation And Configuration Manual

Using LEAP with a Manually Prompted Login

After a Reboot, Logon, or Card Insertion

After your computer reboots, you log on, or you eject and reinsert the client adapter, the adapter does
not automatically attempt to authenticate. You must manually invoke the authentication process. To do
so, follow the steps below.
Step 1 If you rebooted your computer or logged on, complete your standard Windows login.
Open ACU.
Step 2
Select the Manual LEAP Login option from the Commands drop-down menu (see
Step 3
Figure 6-10 Commands Drop-Down Menu
When the LEAP login screen appears (see
Step 4
click OK. The domain name is optional.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
6-12
Figure 6-11), enter your LEAP username and password and
Chapter 6 Using EAP Authentication
Figure 6-10).
OL-1394-07