Cisco AIR-PCI340 Installation And Configuration Manual page 57

Chapter 3 Installing the Client Adapter
Table 3-3
Feature
Security
Static WEP
LEAP authentication with dynamic
WEP
Host-based EAP authentication with
dynamic WEP
Diagnostics
Status screen
Statistics screen (transmit & receive)
Site survey tool
RF link test tool
Link status meter (graphical display)
Perform one of the following:
• If you are planning to configure your client adapter through ACU instead of through Windows XP,
follow the steps below:
a.
b.
c.
d.
If you are planning to configure your client adapter through Windows XP instead of through ACU,
•
go to
If you are planning to configure your client adapter through Windows XP but you want to use ACU's
•
diagnostic tools, go to
instructions in
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Comparison of Windows XP and ACU Client Adapter Features (continued)
Double-click My Computer, Control Panel, and Network Connections.
Right-click Wireless Network Connection and click Properties.
Select the Wireless Networks tab and uncheck the Use Windows to configure my wireless
network settings check box.
Follow the instructions in
ACU.
Appendix E and follow the instructions there.
Appendix E
Chapter 7 to use ACU's diagnostic tools.
Deciding How to Configure Your Client Adapter (Windows XP Only)
Windows XP
Yes
No
Yes
Limited
No
No
No
No
Chapter 4 and Chapter 5 to configure your client adapter through
to configure the adapter through Windows XP; then follow the
ACU
Yes
Yes
Yes
Extensive
Yes
Yes
Yes
Yes
3-23