Leap Authentication Error Messages - Cisco AIR-PCI340 Installation And Configuration Manual

Error Messages

LEAP Authentication Error Messages

This section lists error messages that may occur during LEAP authentication.
Error Message The client adapter doesn't support LEAP. Please make sure that you have
installed the correct client adapter and updated your firmware.
Error Message The client adapter doesn't support WEP, so LEAP cannot be run. Please
make sure that you have installed the correct client adapter and purchased WEP
support.
Error Message The combination of domain name and user name exceeds the maximum number
of characters (32) that LEAP supports. Please uncheck Include Windows Logon Domain
with User Name in ACU or use shorter names.
Error Message The current profile is not configured for LEAP.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
10-20
Explanation LEAP authentication failed because the client adapter's firmware does not support
LEAP.
Recommended Action Make sure that you have installed the correct client adapter and are using the
firmware included in the Install Wizard file.
LEAP authentication failed because the client adapter's firmware does not support
Explanation
WEP.
Recommended Action Make sure that you have installed the correct client adapter and are using the
firmware included in the Install Wizard file.
Explanation The combination of characters entered for the username and domain name in the
Windows login screen or the LEAP login screen exceeds the maximum number supported by LEAP,
which is 32.
Recommended Action Perform one of the following:
– Uncheck the Include Windows Logon Domain with User Name check box in the LEAP
Settings screen of ACU.
– Enter a set of credentials (username, password, and domain name) with fewer characters.
Explanation The Manual LEAP Login option was selected in ACU, but the active profile is not
configured for LEAP. The LEAP authentication process aborts.
If you want the client adapter to LEAP authenticate, select a profile that is
Recommended Action
configured for LEAP.
Chapter 10 Troubleshooting
OL-1394-07