Upgrading The Client Adapter Software; Upgrading The Firmware; Finding The Firmware Version - Cisco AIR-PCM341 Installation And Configuration Manual

Chapter 8 Routine Procedures

Upgrading the Client Adapter Software

This section provides instructions for the following procedures:
•
•

Upgrading the Firmware

The client adapter is shipped with the firmware installed in its Flash memory; however, a more recent
version of the firmware may be available from Cisco.com. Cisco recommends using the most current
version of radio firmware. Follow the instructions in this section to find the version of your client
adapter's firmware and to upgrade it if a more recent version is available from Cisco.com.
Firmware version 5.02.19 or greater is recommended for use with client adapter driver and utility
Note
version 2.30.

Finding the Firmware Version

Follow the steps below to determine if you need to upgrade the client adapter's firmware.
To find the version of firmware that your client adapter is currently using, follow the steps below:
Step 1
a.
b.
Figure 8-2
OL-1375-03
Upgrading the firmware, see below
Upgrading the driver and client utilities,
Double-tap the ACU icon or select Start > Programs > Cisco > ACU.
Tap the Firmware tab. The Firmware screen appears (see
Firmware Screen
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE

Upgrading the Client Adapter Software

page 8-6
Figure 8-2).
8-3