Inserting A Pci Card - Cisco AIR-PCI340 Installation And Configuration Manual

Chapter 9 Routine Procedures
Figure 9-1
Note

Inserting a PCI Card

Turn off the PC and all its components.
Step 1
Remove the computer cover.
Step 2
Note
Remove the screw from the top of the CPU back panel above an empty PCI expansion slot. This screw
Step 3
holds the metal bracket on the back panel.
Static electricity can damage your PCI card. Before removing the adapter from the anti-static packaging,
Caution
discharge static by touching a metal part of a grounded PC.
Examine the PCI card. The antenna connector and the LEDs face out of your computer and are visible
Step 4
when you put the cover back on. The bottom edge of the card is the connector you will insert into an
empty expansion slot in your computer. See
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Inserting a PC Card or PC-Cardbus Card into a Computing Device
The profiles for PC-Cardbus cards are tied to the slot in which the card is inserted. Therefore,
you must always insert your PC-Cardbus card into the same slot or create profiles for both slots.
On most Pentium PCs, PCI expansion slots are white. Refer to your PC documentation for slot
identification.
Inserting and Removing a Client Adapter
Figure 9-2.
9-3