Table of Contents
Advertisement
Using PEAP
Figure 6-13 One Time Password Screen
Step 5
Enter your PEAP authentication username in the User Name field.
Step 6
Select either the Hardware Token or Software Token option. If you select the Software Token option,
the Password field on the One Time Password screen changes to the PIN field.
Note
Step 7
Enter either your hardware token password or your software token PIN.
Step 8
Click OK. The client adapter should now EAP authenticate. To verify authentication, double-click My
Computer, Control Panel, and Network Connections. The status appears to the right of your Wireless
Network Connection. Click View and Refresh to obtain the current status. If the client adapter is
authenticated, the status reads Authentication succeeded.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
6-18
The Hardware Token and Software Token options are available only if you selected both of them
on the Generic Token Card Properties screen during configuration. Otherwise, only the option
you selected will be available.
Chapter 6
Using EAP Authentication
OL-1394-07
Advertisement
Table of Contents
Troubleshooting
