Cisco AIR-PCI340 Installation And Configuration Manual page 133

Chapter 6 Using EAP Authentication
Figure 6-9
When the LEAP login screen appears (see
and click OK. The domain name is optional.
Step 2 The LEAP Authentication Status screen appears. If your client adapter authenticates, the screen shows
that each stage was successful and then disappears. ACM now shows Authenticated, and the Server
Based Authentication field on the ACU Status screen shows LEAP Authenticated.
If the authentication attempt fails, an error message appears after the LEAP timeout period has expired.
Refer to the
take.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Commands Drop-Down Menu
"LEAP Authentication Error Messages" section on page 10-20
Using LEAP with a Manually Prompted Login
Figure 6-8), enter your LEAP username and password
for the necessary action to
6-11