Cisco 6503 - Catalyst Firewall Security Sys Installation Manual page 346

3000 W AC-Input Power Supply
Table A-25
Specification
Power supply output
Front panel power
connector
Output holdup time
kVA rating
Heat dissipation
Weight
1. The kVA rating listed for the power supply should be used as the sizing criteria for both UPS outputs as well as standard
circuits and transformers to power a switch.
Table A-26
Catalyst 6500 Series Switches Installation Guide
A-38
3000 W Power Supply Specifications (continued)
Description
100/120 VAC operation
•
–
–
–
–
200/240 VAC operation
•
–
–
–
–
A two-pin male Molex connector is located in the lower right corner of
the power supply front panel. The connector provides 42 VDC at a
maximum of 17 A. This connector provides power to the
WS-6509-NEB-UPGRD kit fan assembly through a power harness also
provided in the kit. A hinged protective flap secured by a captive screw
covers the connector when it is not in use.
20 ms minimum
1
3520 W (total input power) or 3.6 KVA (high-line operation)
12,046 BTU/hour (approx.)
15.8 lb (7.2 kg)
lists the power supply LEDs and their meanings.
25.0 A @ +3.3 V
5 A @ +5 V
12 A @ +12 V
27.89 A @ +42 V
25.0 A @ +3.3 V
5 A @ +5 V
12 A @ +12 V
65.98 A @ +42 V
Appendix A Power Supply Specifications
OL-5781-08