8700 W Power Supply Ac Power Cords - Cisco 6503 - Catalyst Firewall Security Sys Installation Manual

8700 W AC-Input Power Supply

8700 W Power Supply AC Power Cords

Table A-41
power supply. Included in the table are references to illustrations of the power cords.
Table A-41 8700 W Power Supply AC Power Cords
Locale
Argentina
Australia, New Zealand
People's Republic of China CAB-AC16A-CH=
Continental Europe
International
Israel
Italy
Japan, North America
(nonlocking plug)
200–240 VAC operation
Japan, North America
(locking plug)
200–240 VAC operation
Japan, North America
100–120 VAC operation
Power Distribution Unit
2
(PDU
Switzerland
1. When operating with 100–120 VAC, you must use two or three AC power cords and the power supply output is limited to either 2800 W (2 inputs) or
4200 W (3 inputs).
2. The PDU power cable is designed for users who power their switch from a PDU. The end of the cable that plugs into the chassis power supply has a
C19 connector; the other end of the cable that connects to the PDU has a C20 connector.
Catalyst 6500 Series Switches Installation Guide
A-62
lists the specifications for the AC power cords that are available for the 8700 W AC-input
Power Cord
Part Number
CAB-7513ACR= or
CAB-IR2073-C19-AR=
CAB-AC-16A-AUS=
CAB-AC-2500W-EU=
CAB-AC-2500W-INT=
CAB-AC-2500W-ISRL=
CAB-7513ACI=
CAB-AC-2500W-US1=
CAB-AC-C6K-TWLK=
1
CAB-7513AC=
CAB-C19-CBN=
CAB-ACS-16=
AC Source Plug Type Cordset Rating
IRAM 2073 16 A, 250 VAC
AU20S3 16 A, 250 VAC
GB16C 16 A, 250 VAC
CEE 7/7 16 A, 250 VAC
IEC 309 16 A, 250 VAC
SI16S3 16 A, 250 VAC
CEI 23-16/7 16 A, 250 VAC
NEMA 6-20 16 A, 250 VAC
NEMA L6-20 16 A, 250 VAC
NEMA 5-20 16 A, 125 VAC
IEC 60320 C19 16 A, 250 VAC
IEC 60320 C20
SEV 5934-2 Type 23 16 A, 250 VAC
Appendix A Power Supply Specifications
Power Cord
Reference
Illustration
Figure A-31
Figure A-46
Figure A-37
Figure A-41
Figure A-42
Figure A-34
Figure A-35
Figure A-43
Figure A-44
Figure A-36
Figure A-47
Figure A-45
OL-5781-08