Appendix; Repacking The Switch - Cisco 6503 - Catalyst Firewall Security Sys Installation Manual

Repacking the Switch

If you need to return or move the Catalyst 6500 series switch chassis, follow these steps to repack the
switch using the original packaging material:
Step 1 Set the chassis in the bottom pallet. (See
Place the packing bag over the chassis.
Step 2
Place the front-packing material and power supply packing material around the chassis.
Step 3
Place the power supplies in the spaces provided in the power supply packing material. (See
Step 4
Place the top-packing material over the top of the chassis and power supplies.
Step 5
Place the rack-mount kit and the accessory kit on the top-packing material.
Step 6
Note
Place the outside carton over the entire package.
Step 7
Fold the outside carton down over the top and seal with packing tape.
Step 8
Wrap three packing straps tightly around the top and bottom of the package to hold the outside carton
Step 9
and the bottom pallet together. (See
OL-5781-08
You must include the accessory kit for the final packaging to fit properly.
A P P E N D I X
Figure C-1.)
Figure C-2.)
Catalyst 6500 Series Switches Installation Guide
C
Figure C-1.)
C-1