Installing a Catalyst 6504-E Switch Chassis
What is Next
After installing the chassis in its location, continue with the installation process by following these
procedures:
•
•
•
•
Optional Installation Kits
There are no optional installation kits available for the Catalyst 6504-E switch chassis.
Catalyst 6500 Series Switches Installation Guide
3-16
Connecting the chassis to system ground. See
page
3-52.
Installing and connecting the power supplies to source power. Go to Chapter 4 for information on
how to install and cable power supplies.
Connecting the network interface cables to the supervisor engine and modules. This may involve
installing transceivers before you attach the network interface cables. See
Cables" section on page
3-61.
Powering-up the chassis and verifying the installation. See
section on page
3-84.
Chapter 3
"Establishing the System Ground" section on
"Verifying Switch Chassis Installation"
Installing the Switch
"Attaching the Interface
OL-5781-08