Cisco 6503 - Catalyst Firewall Security Sys Installation Manual page 152

Installing a Catalyst 6509-NEB or Catalyst 6509-NEB-A Switch Chassis
Step 3 Loosen the two captive installation screws on the front panel. (See
Figure 3-15
Remove the front panel, and set it aside.
Step 4
Step 5 Attach the interface cables to the modules, and route the cables through the cable guide.
Step 6 Install the front panel by positioning the top of the front panel over the cable guide.
Step 7 Tighten the two captive installation screws. (See
Catalyst 6500 Series Switches Installation Guide
3-32
Removing the Front Panel
FAN
STATU S
FAN
1
FAN
2
Captive installation screws
Chapter 3
Figure 3-15.)
Figure 3-15.)
Installing the Switch
OL-5781-08