Create Two Vlans; Cli: Creating Two Vlans; Web Interface: Creating Two Vlans - NETGEAR FSM726E-100NAS Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
use to configure the switch as shown in the diagram.
Port 1/0/2 VLAN
Router Port 1/3/1
192.150.3.1
Layer 2
Switch
VLAN 10
Figure 4-1
The following examples show how to create VLANs, assign ports to the VLANs, and assign a VLAN as the
default VLAN to a port.

Create Two VLANs

The example is shown as CLI commands and as a Web interface procedure.

CLI: Creating Two VLANS

Use the following commands to create two VLANs and to assign the VLAN IDs while leaving the names
blank.
(Netgear Switch) #vlan database
(Netgear Switch) (Vlan)#vlan 2
(Netgear Switch) (Vlan)#vlan 3
(Netgear Switch) (Vlan)#exit

Web Interface: Creating Two VLANS

To use the Web interface to configure the managed switch, proceed as follows:
4-2
Layer 3 Switch
Port 1/0/3 VLAN
Router Port 1/3/2
192.150.4.1
Port 1/0/1
Layer 2
Switch
v1.0, November 2008
VLAN 20
Virtual LANs