NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
a.
From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen
similar to the following displays.
Figure 9-15
b. Under Interface Configuration, scroll down to interface 1/0/4 and select the checkbox for that
interface. 1/0/4 now appears in the Interface field at the top.
•
In the OSPF Area ID field, enter 0.0.0.2.
•
Select the Enable from the OSPF Admin Mode pull-down menu.
•
In the Priority field, enter 255.
•
In the Metric Cost field, enter 64.
c.
Click Apply to save the settings.
Configure Area 1 as a Stub Area
The example is shown as CLI commands and as a Web interface procedure.
Port 2/0/11
Area 0
Figure 9-16
9-16
Layer 3
Switch
Port 2/0/191
v1.0, November 2008
Port 1/0/151
Area 1
Layer 3
Switch
OSPF