NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
a.
From the main menu, select Switching > STP > STP Configuration. A screen similar to the
following displays.
Figure 26-1
b. Enter the following information in the STP Configuration.
•
Next to the Spanning Tree Admin Mode, select the Enable radio button.
•
Next to the Force Protocol Version, select the IEEE 802.1d radio button.
c.
Click Apply.
2.
Configure CST Port Configuration.
a.
From the main menu, select Switching > STP > CST Port Configuration. A screen similar to the
following displays.
Figure 26-2
26-2
v1.0, November 2008
Spanning Tree Protocol