NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
b. Under IP Interface Configuration, scroll down to interface 2/0/19 and select the checkbox for that
interface. 2/0/19 now appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration:
•
In the IP Address field, enter 192.168.20.1.
•
In the Network Mask field, enter 255.255.255.0.
•
Select Enable from the pull-down menu.
d. Click Apply to save the settings.
4.
Specify the Router ID and Enable OSPF for the switch.
a.
From the main menu, select Routing > OSPF > Basic> OSPF Configuration. A screen similar to the
following displays.
Figure 9-20
b. Under the OSPF Configuration, enter the following information:
In the Router ID, enter 1.1.1.1.
c.
Click Apply to save the settings.
9-20
v1.0, November 2008
OSPF