NETGEAR FSM726E-100NAS Administration Manual page 129

a. From the main menu, select Routing > RIP > Advanced> Interface Configuration. A screen similar
to the following displays.
Figure 9-41
b. Enter the following information in Interface Configuration.
• Select the 1/0/11 from Interface pull-down menu.
• Next to the RIP Admin Mode, select the Enable radio button.
c. Click Apply to save the settings.
6. Enable OSPF on the port 1/0/15.
a. From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen
similar to the following displays.
Figure 9-42
b. Under IP Interface Configuration, scroll down to interface 1/0/15 and select the checkbox for that
interface. 1/0/15 now appears in the Interface field at the top.
• In the OSPF Area ID field, enter 0.0.0.1.
• Select the Enable from the OSPF Admin Mode pull-down menu.
OSPF
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
9-35