NETGEAR FSM726E-100NAS Administration Manual page 124

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
a. From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen
similar to the following displays.
Figure 9-34
b. Under Interface Configuration, scroll down to interface 2/0/11 and select the checkbox for that
interface. 2/0/11 now appears in the Interface field at the top.
• In the OSPF Area ID field, enter 0.0.0.0.
• Select the Enable from the OSPF Admin Mode pull-down menu.
c. Click Apply to save the settings.
6. Enable OSPF on the port 2/0/19.
a. From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen
similar to the following displays.
Figure 9-35
9-30
v1.0, November 2008
OSPF