b. Under IP Configuration, make the following selections:
•
Next to Routing Mode, select the Enable radio button.
•
Next to IP Forwarding Mode, select the Enable radio button.
c.
Click Apply to enable IP Routing.
5.
Create an ACL with ID 101:
a.
From the main menu, select Security > ACL > Advanced > IP ACL. A screen similar to the
following displays.
Figure 12-32
b. In the IP ACL ID field of the IP ACL Table, enter 101.
c.
Click Add.
6.
Create an ACL with ID 102:
a.
From the main menu, select Security > ACL > Advanced > IP ACL. A screen similar to the
following displays.
Figure 12-33
Access Control Lists (ACLs)
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
12-31