Table of Contents
Advertisement
a.
From the main menu, select Switching > VLAN> Advanced > Port PVID Configuration. A screen
similar to the following displays.
Figure 4-7
b. Under PVID Configuration, scroll down to interface 1/0/4 and select the checkbox for that
interface. 1/0/4 now appears in the Interface field at the top.
c.
Under PVID Configuration, select Admit All from the Acceptable Frame Type polyhedron menu.
d. Click Apply to save the settings.
Assign VLAN3 as the Default VLAN for Port 1/0/2
This example shows how to assign VLAN 3 as the default VLAN for port 1/0/2.
CLI: Assigning VLAN3 as the Default VLAN for Port 1/0/2
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 1/0/2
(Netgear Switch) (Interface 1/0/2)#vlan pvid 3
(Netgear Switch) (Interface 1/0/2)#exit
(Netgear Switch) (Config)#exit
Web Interface: Assigning VLAN3 as the Default VLAN for Port 1/0/2
To use the Web interface to configure the managed switch, proceed as follows:
1.
Assign VLAN 3 as the default VLAN for port 1/0/2.
Virtual LANs
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
4-7
Advertisement
Table of Contents
