NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
•
Select False from the Match Every pull-down menu.
•
Select IP from the Protocol Type pull-down menu.
e.
Click Apply to save the settings.
11. Apply ACL 102 to port 24:
a.
From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A screen
similar to the following displays.
Figure 12-41
b. Under Binding Configuration, make the following selection and enter the following information:
•
Select 102 from the ACL ID pull-down menu.
•
In the Sequence Number field, enter 1.
c.
Click Unit 1. The ports display.
d. Click on the gray box under port 24. A flag appears in the box.
e.
Click Apply to save the settings.
12-36
v1.0, November 2008
Access Control Lists (ACLs)