NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
a.
From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar to the
following displays.
Figure 12-30
b. Enter the following information in the VLAN Routing Wizard:
•
In the Vlan ID field, enter 38.
•
In the IP Address field, enter 10.100.5.34.
•
In the Network Mask field, enter 255.255.255.0.
c.
Click Unit 1. The ports display.
d. Click the gray box under port 38 twice until U displays. The U specifies that the egress packet is
untagged for the port.
e.
Click Apply to save VLAN 38.
4.
Enable IP Routing:
a.
From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to the
following displays.
Figure 12-31
12-30
v1.0, November 2008
Access Control Lists (ACLs)