Vlan Configuration Example; Cli Examples; Example #1: Create Two Vlans - NETGEAR ProSafe FSM7328S Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide

VLAN Configuration Example

The diagram in this section shows a switch with four ports configured to handle the traffic for two
VLANs. port 1/2/2 handles traffic for both VLANs, while port 1/2/1 is a member of VLAN 2 only,
and ports 1/2/3 and 1/2/4 are members of VLAN 3 only. The script following the diagram shows
the commands you would use to configure the switch as shown in the diagram.
Figure 3-1

CLI Examples

The following examples show how to create VLANs, assign ports to the VLANs, and assign a
VLAN as the default VLAN to a port.

Example #1: Create Two VLANs

Use the following commands to create two VLANs and to assign the VLAN IDs while leaving the
names blank.
(Netgear Switch) #vlan database
(Netgear Switch) (Vlan)#vlan 2
(Netgear Switch) (Vlan)#vlan 3
(Netgear Switch) (Vlan)#exit
3-2
v1.0, March 2006
Virtual LANs