NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
•
In the Next Hop IP Address field, enter 192.168.200.2.
c.
Click Add.
6.
Create a static route with IP address 192.168.50.0/24:
a.
From the main menu, select Routing > Routing Table > Basic > Route Configuration. A screen
similar to the following displays.
Figure 12-13
b. Under Configure Routes, make the following selection and enter the following information:
•
Select Static from the Route Type pull-down menu.
•
In the Network Address field, enter 192.168.50.0.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Next Hop IP Address field, enter 192.168.200.2.
c.
Click Add.
7.
Create an ACL with ID 101.
a.
From the main menu, select Security > ACL > Advanced > IP ACL. A screen similar to the
12-16
v1.0, November 2008
Access Control Lists (ACLs)