NETGEAR FSM726E-100NAS Administration Manual page 255

3. Assign IP address 10.100.5.33/24 to the interface 1/0/19
a. From the main menu, select Routing > Advanced >IP Interface Configuration. A screen similar to
the following displays.
Figure 16-15
b. Under IP Interface Configuration, scroll down to interface 1/0/19 and select the checkbox for that
interface. 1/0/19 now appears in the Interface field at the top.
c. Under the IP Interface Configuration, enter the following information.
• In the IP Address field, enter 10.100.5.33.
• In the Subnet Mask, enter 255.255.255.0.
• Select Enable from Routing Mode pull-down menu.
d. Click Apply to save the settings.
4. Create an authentication name list.
a. From the main menu, select Security > Management Security > Login> Authentication List. A
screen similar to the following displays.
Figure 16-16
b. In the List Name field, enter dot1xList.
c. Select the Radius from the 1 pull-down menu.
Security Management
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
16-17