NETGEAR FSM726E-100NAS Administration Manual page 338

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
• Next to the Spanning Tree Admin Mode, select the Enable radio button.
• Next to the Force Protocol Version, select the IEEE 802.1s radio button.
c. Click Apply.
2. Configure MST Configuration.
a. From the main menu, select Switching > STP > MST Configuration. A screen similar to the
following displays.
Figure 26-6
b. Configure MST ID 1.
• In the MST ID field, enter 1.
• In the Priority field, enter 4096.
• In the VLAN Id field, enter 2.
• Click Add.
• In the VLAN Id field, enter 3.
• Click Apply.
c. Configure MST ID 2.
• In the MST ID field, enter 2.
• In the Priority field, enter 4096.
• In the VLAN Id field, enter 11.
• Click Add.
• In the VLAN Id field, enter 12.
• Click Apply.
26-6
v1.0, November 2008
Spanning Tree Protocol