NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
similar to the following displays.
Figure 12-25
b. Under Configure Routes, make the following selection and enter the following information:
•
Select Static from the Route Type pull-down menu.
•
In the Network Address field, enter 192.168.100.0.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Next Hop IP Address field, enter 192.168.200.1.
c.
Click Add.
5.
Create a static route with IP address 192.168.30.0/24:
a.
From the main menu, select Routing > Routing Table > Basic > Route Configuration. A screen
similar to the following displays.
Figure 12-26
12-24
v1.0, November 2008
Access Control Lists (ACLs)