NETGEAR FSM726E-100NAS Administration Manual page 167

similar to the following displays.
Figure 12-21
b. Under Binding Configuration, make the following selection and enter the following information:
• Select 102 from the ACL ID pull-down menu.
• In the Sequence Number field, enter 2.
c. Click Unit 1. The ports display.
d. Click on the gray box under port 44. A flag appears in the box.
e. Click Apply to save the settings.
To use the Web interface to configure the GSM7352S, proceed as follows:
1. Create VLAN 40 with IP address 192.168.40.1/24.
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar to the
following displays.
Figure 12-22
Access Control Lists (ACLs)
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
12-21