Table of Contents
Advertisement
Show Logging Traplogs
The example is shown as CLI commands and as a Web interface procedure.
CLI: Showing Logging Traplogs
(Netgear Switch Routing)
<cr>
Press Enter to execute the command.
(Netgear Switch Routing)
Number of Traps Since Last Reset............ 6
Trap Log Capacity............................256
Number of Traps Since Log Last Viewed....... 6
Log System Up Time
--- --------------
0
0 days 00:00:46
1
0 days 00:01:01
2
0 days 00:21:33
3
0 days 18:33:31
4
0 days 19:27:05
5
0 days 19:29:57
Web Interface: Showing Logging Trap Logs
From the main menu, select Monitoring –> Logs->Trap Logs. A screen similar to the following displays.
Figure 19-7
Syslog
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
Trap
----------------------------------------------
Link Up: Unit: 3 Slot: 0 Port: 2
Cold Start: Unit: 0
Failed User Login: Unit: 1 User ID: admin
Failed User Login: Unit: 1 User ID: \
Multiple Users: Unit: 0
Multiple Users: Unit: 0
v1.0, November 2008
#show logging traplogs
#show logging traplogs
Slot: 3 Port: 1
Slot: 3 Port: 1
?
19-7
Advertisement
Table of Contents
