NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
h. In the VLAN Name field, enter VLAN20.
i.
Select Static from the VLAN Type pull-down menu.
j.
Click Add.
2.
Add ports to the VLAN10 and VLAN20.
a.
From the main menu, select Switching > VLAN >Advanced > VLAN Membership. A screen
similar to the following displays.
Figure 7-4
b. Select 10 from the VLAN ID pull-down menu.
c.
Click the Unit 1. The Ports display.
d. Click the gray box under port 1 and 2 until T displays. The T specifies that the egress packet is
tagged for the port.
e.
Click Apply.
f.
From the main menu, select Switching > VLAN >Advanced > VLAN Membership. A screen
similar to the following displays.
Figure 7-5
7-4
v1.0, November 2008
VLAN Routing