NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
b. Under IP Interface Configuration, scroll down to interface 1/0/3 and select the checkbox for that
interface. 1/0/3 now appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration:
•
In the IP Address field, enter 192.130.3.1.
•
In the Network Mask field, enter 255.255.255.0.
•
Select Enable from the pull-down menu.
d. Click Apply to save the settings.
4.
Assign IP address 192.64.4.1 to the port 1/0/4.
a.
From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 9-11
b. Under IP Interface Configuration, scroll down to interface 1/0/4 and select the checkbox for that
interface. 1/0/4 now appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration:
•
In the IP Address field, enter 192.64.4.1.
•
In the Network Mask field, enter 255.255.255.0.
•
Select Enable from the pull-down menu.
d. Click Apply to save the settings.
5.
Specify the Router ID and Enable OSPF for the switch
9-12
v1.0, November 2008
OSPF