NETGEAR FSM726E-100NAS Administration Manual page 152

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
• Select the TCP from the Protocol Type pull-down menu.
• In the Source IP Address, enter 192.168.77.0.
• In the Source IP Mask, enter 0.0.0.255.
• In the Destination IP Address, enter 192.178.77.0.
• In the Destination IP Mask, enter 0.0.0.255.
b. Click Apply to save the settings.
4. Create another ACL rule and add it to the ACL 101.
a. After you click the Add button on the step 3, A screen similar to the following displays.
Figure 12-5
b. Enter the following information in the Extended ACL Rule Configuration.
• In the Rule ID(1 to 23) field, enter 2.
• Next to the Action, select Permit radio button.
• Select the UDP from the Protocol Type pull-down menu.
• In the Source IP Address, enter 192.168.77.0.
• In the Source IP Mask, enter 0.0.0.255.
• In the Destination IP Address, enter 192.178.77.0.
• In the Destination IP Mask, enter 0.0.0.255.
c. Click Apply to save the settings.
5. Apply the ACL 101 to the port 2.
a. From the main menu, select Security > ACL >IP ACL> IP Binding Configuration. A screen
12-6
v1.0, November 2008
Access Control Lists (ACLs)