Vertical Service Announcement Codes - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Feature Dial Services
Codes (continued

Vertical Service Announcement Codes

• Service Annc (Announcement) Base Number: Defaults to blank.
• Service Annc (Announcement) Extension Codes: Defaults to blank.
Description
The *codes should not conflict with any of the other
vertical service codes internally processed by the
Cisco SPA9000. You can empty the corresponding
*code that you do not want to Cisco SPA9000 to
process.
You can add a parameter to each *code in Features
Dial Services Codes to indicate what tone to play after
the *code is entered, such as *72'c'|*67'p'. Below are a
list of allowed tone parameters (note the use of back
quotes surrounding the parameter without spaces)
• c = Cfwd Dial Tone
• d = Dial Tone
• m = MWI Dial Tone
• o = Outside Dial Tone
• p = Prompt Dial Tone
• s = Second Dial Tone
• x = No tones are place, x is any digit not used above
If no tone parameter is specified, the Cisco SPA9000
plays Prompt tone by default.
If the *code is not to be followed by a phone number,
such as *73 to cancel call forwarding, do not include it
in this parameter. In that case, simple add that *code in
the dial plan and the SPA9000 send INVITE *73@..... as
usual when user dials *73.
A
260