Cisco 521SG - Unified IP Phone VoIP Administration Manual page 318

Cisco SPA IP Phone Field Reference
Attendant Console Tab (Cisco SPA500 Series)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Test Mode Enable
Attendant Console Call
Pickup Code
BLF List URI
Unit 1 Key 1-32
Call Pickup Audio
Notification
For more information, see
Console.".
Description
Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back
to off. In test mode, when all the buttons on the
Cisco SPA500S are returned to off, all the keys
become orange. The IP phone must be rebooted
after the test is completed.
The star code used for picking up a ringing call.
Defaults to *98.
Automatically configures Busy Lamp Field (BLF)
subscriptions for all users on a monitored list. See
Configuring BroadSoft Busy Lamp Field Auto-
Configuration.
Enter a strings that define the extension and other
parameters associated with each lighted button
on the first Cisco Attendant Console. Keywords
and values are case-sensitive. The configuration
script is described in the
Scripts.
By default, this parameter is set to no. If you set it
to yes, the phone plays the Call Pickup tone when
there are incoming calls to any of the lines that the
user is monitoring with the Call Pickup function.
Use the following in your configuration file:
<Call_Pickup_Audio_Notification ua="na">Yes
</Call_Pickup_Audio_Notification>
Chapter 9, "Configuring the Cisco Attendant
A
Unit/Key Configuration
317