Cisco 521SG - Unified IP Phone VoIP Administration Manual page 22

Getting Started
Using the Web-Based Configuration Utility
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
To save your change, press Save.
Cisco SPA501G
To allow or disallow from the phone viewing of the phone web user interface by
using the IVR:
Press the Setup button on the phone. The configuration menu is announced.
In the IVR menu, enter 7932.
Press 1 to enable the web server, then press #.
To save the configuration, press 1; to review, press 2; to re-enter, press 3; to exit,
press *.
Cisco SPA525G or Cisco SPA525G2
To view the phone parameters by using the phone web user interface, the phone
web server must be enabled. Your system administrator might have disabled the
phone option to make the phone web user interface viewable or writable.
To allow or disallow from the phone viewing of the phone web user interface:
Press Setup.
To display the Web Server Writable option, select Settings > Network
Configuration > Web Server.
To change the status of the Web Server parameter, press the Right Arrow key to
toggle the feature enabled (checked) or disabled (unchecked).
To save your change, press Set.
Cisco WIP310
To allow or disallow from the phone viewing of the phone web user interface:
In the Home screen, press Select to choose Settings.
Press Select again to reach the Settings menu.
1
21