Miscellaneous Line Key Settings - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Miscellaneous Line Key Settings

Does not apply to the Cisco WIP310.
Parameter
SCA Line ID Mapping
SCA Barge-In Enable
SCA Sticky Auto Line
Seize
Call Appearance Per Line
Description
Specifies the shared call appearance line ID
mapping. Choose Vertical First or Horizontal First.
Each LED can hold multiple calls and the first call
on an LED makes it light up. Horizontal first means
the second call makes the same LED flash.
Vertical first means the second call lights up the
next LED.
For example, if Extension 101 is assigned to two
LEDs, and Vertical First is selected, the second
call on Extension 101 lights up the second LED.
The third call makes the first LED flash, and the
fourth call makes the second LED flash.
If Horizontal First is selected, the second call on
Extension 101 makes the first LED flash. The third
call lights up the second LED, and the fourth call
makes the second LED flash.
Enables the SCA Barge-In.
Defaults to no.
When enabled, taking the phone off-hook will not
automatically pick up an incoming call on a shared
line.
Specifies how many calls per line to allow. You
can choose a value from 2 (default) to the
maximum value of 10. This parameter is not
supported on the Cisco SPA501G and
Cisco SPA301 phones. Also, this parameter is
only supported when the phones are operating in
the SIP mode.
A
275